| Brand |
Integrated technology cấp power PoE and technology tái tạo năng lượng
Planet sớm đưa ra product device tái tạo năng lượng and cấp power PoE IEEE 802.3at, BSP-360 designed triển ktwo for việc cấp power for syssticker monitoring and syssticker wireless not dây or monitoring from xa and management the địa chỉ IP. Dựa on technology xanh, BSP-360 has thể nạp power from năng lượng tự nhiên: năng lượng mặt trời, năng lượng gió, thủy electrical to chuyển đổi năng lượng tự nhiên thành electrical cấp power for the IP camera and the thiế bị phát sóng not dây wireless Aps, for the ứng dụng ở at the environment: the đập thủy electrical, khu rừng, sa mạc, vườn quốc gia khu bảo tồn động vật and đường high tốc

Cấp power stable and not has khí thải carbon
BSP-360 chuyển đổi năng lượng mặt trời and hoạt động together with bộ pin nickel-cadmium or bộ pin lead-acid to hình thành syssticker provides electrical mặt trời for the ứng dụng outside trời. BSP-360 will liên tục cấp power PoE and not thải ra khí carbon for the ứng dụng monitoring outside trời or phát sóng wireless mà not need cáp. Thiết bị has thể cấp power for the device first last and tiếp tuc sạc in đêm to hoạt động

Integrated function power độc lập for management pin
Giống such as the unit cấp power other for pin and power capacity tiêu thụ, BSP-360 has thể has the tính năng management especially after đây:
• Trạng thái and tình trạng used pin hiện at
• Thống kê dung lượng pin
• Bảo vệ with mức điên áp low
Thống kê and trạng thái used pin
Người quản trị has thể truy cập BSP-360 to biết trạng thái power and tái tạo năng lượng, and ước lượng thời gian tiêu thụ

Bảo vệ in trường hợp electrical áp low
Nếu power quá low to has thể cấp for syssticker device, syssticker will tự động tắt the device with độ ưu tiên low to ensures syssticker hoạt động bình thường and after that gửi cảnh bảo to nhà quản trị

Supports tính năng PoE supports cấp power for the device nhận power PoE BSP-360 supports tính năng management PoE
• Kiểm tra device nhận power hoạt động not
• Supports lập lịch cấp power tái used
• Supports lập lịch
• Supports monitoring used PoE
Features thông minh Kiểm tra device nhận power PoE
BSP-360 has thể configuration monitoring the device nhận power PoE according to thời gian thực and thông qua tính năng Ping. Khi device nhận power ngừng hoạt động and not has hồi đáp, BSP-360 will cấp power PoE lại and helps device ism việc trở lại. device nâng high độ brand quả cấp power PoE simultaneously helps giảm load việc quản trị for quản trị viên

Features lập lịch tái chế việc cấp power
BSP-360 for phép each a connection PoE such as IP camera or Wireless Access point will tự khởi động lại according to thời gian especially. vì thế nó will ism giảm việc bị tràn memory đệm for camera or Access Point

Features lập lịch for tiết kiệm năng lượng
Theo xu hướng tiết kiệm năng lượng on toàn thế giới and bảo vệ environment, BSP-360 has thể management brand quả power cấp PoE has capability cấp mức power capacity high. Việc lập lịch PoE helps for việc tắt or bật tính năng power nuôi PoE according to thời gian especially helps for the environment enterprise vừa and small tiết kiện electrical năng and chi phí. In addition device also tăng bảo mật bằng theh tắt power PoE in giờ hành chính

Giám sát trạng thái sử dung PoE thông qua chỉ number đèn led for monitoring according to thời gian thực
Thông qua biểu đồ trạng thái used power on interface management web, BSP-360 for phép nhà quản trị has thể monitoring the trạng thái of the device connection according to thời gian thực. Therefore device tăng cường brand quả management. Hơn thế nữa BSP-360 helps users according to dõi tình trạng hiện at of việc used power easy dàng and brand quả thông qua chỉ number đèn led gọi is trạng thái used, ở phía before mặt BSP-360 has 3 đèn LED hiển thị the theh used power other nhau.

Mô hình ứng dụng
Used cấp power bằng năng lượng mặt trời for giải pháp monitoring not dây
Triển ktwo cấp power PoE for device network gia đình

Connection not dây for ứng dụng not dây for khoảng theh large

Allows expand triển ktwo network with the bộ chuyển đổi media converter

Characteristics kỹ thuật
Những characteristics chung
Features vật lý
Supports 5 port 10/100/1000Base-T gigabit RJ-45 cấp power on 4 port Injector PoE IEEE 802.3af/at
Interface RJ-45 for management cơ bản and thiết lập
USB standard A for sao lưu and khôi phục
PoE
Tương thích with standard PoE IEEE 802.3at for end-span PSE
Tương thích ngược with standard PoE IEEE 802.3af
Supports 4 port IEEE 802.3af/at
Supports cấp power PoE tới 30W for each port PoE
Tự động phát hiện the device nhận power PoE
Bảo vệ mạch vòng to ngăn chặn sự nhiễu between the port
Cấp power from xa tới 100m
Management power PoE
• Kiểm soát tổng power capacity PoE
• Mỗi port PoE has function bật tắt
• Có chế độ ưu tiên cấp power PoE
• Giới hạn power PoE
• Lập lịch PoE
• Kiểm tra tình trạng device nhận power PoE
Management PIN
Kiểu type pin lựa chọn: Nickel-cadmium or lead-acid
Dễ dàng standard đoán trạng thái hoạt động syssticker thông qua syssticker đèn led
Trạng thái hiện at and tình trạng pin
Thống kê power capacity tiêu thụ and dung lượng pin
Bảo vệ mức electrical áp low: Gửi cảnh báo and dừng mức độ ưu tiên for cấp power PoE when mức electrical áp low
Bảo vệ PWM
Supports installation cài đặt công nghiệp
Supports lớp vỏ IP30
Design gắn tường and supports thanh ray lắp tủ
Supports nhiệt độ -10 to 60 độ C
Supports bảo vệ ESD 6KV DC
Design power dự phòng
Supports dải electrical áp: -24V ~ 45V
Chuyển mạch
Supports hardware 10/100 Mbps (bán song công/ song công), 1000 Mbps (bán song công/ song công), tự động nhận speed MDI/MDI-X
Supports tính năng store-and-forward with speed dây and tỷ lê chuyển tiếp
Hỗ trơ capability điều whenển dòng IEEE 802.3x in chế độ song công and for hoạt động bán sông công
Supports bảng địa chỉ MAC 8K
Tự động gán địa chỉ
Router
Supports protocol Internet: Dynamic IP, static IP, PPPoE, L2TP, PPTP
Supports định tuyến tĩnh RIPv1 and RIPv2
Kiểm soát threendwidth on địa chỉ IP/MAC
Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for the ứng dụng other nhau
Supports 802.1d STP and IGMP Proxy
An ninh
Supports Port Filtering helps ngăn chặn the ứng dụng truy cập Internet
Supports Mac Filtering helps ngăn chặn the máy tính and device dựa on địa chỉ MAC
Supports URL Filtering for phép truy cập trang web according to danh sách
Supports IP Source guard to ngăn chặn tấn công giả mạo IP
Chống tán công DoS
Management
Supports interface management
• Management interface web Ipv4
• SNMP v1, v2c
Supports gán địa chỉ IP static and DHCP
Supports duy trì syssticker
• Cập nhật firmware thông qua HTTP
• Có thể configuration lên thông qua HTTP
• Hỗ trơ phím reset for khởi động syssticker according to chế độ configuration mặc định
Supports NTP
Supports SNMP trap for interface Link Up and Link Down
Supports thông báo sự kiện thông qua việc remote from xa
Supports ứng dụng PLANET Smart Discovery
Technical Specifications
| Hardware Specifications | |
| Copper Ports | LAN: 5 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 1 to Port 5, bridge mode) |
| WAN: 1 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 5, gateway mode) | |
| PoE Injector Port | 4 ports with 802.3af/802.3at PoE injector function (Port 1 to Port 4) |
| USB | 1 USB Type A female for setting threeckup |
| Power Output | 4 PoE out 51VDC; max. 30 watts per PoE port |
| 2 DC out 24@ 1A maximum (four-pin terminal block) | |
| * The voltage of DC out is threesed on the threettery. | |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 10Gbps/non-blocking |
| Switch Throughput@64 bytes | 5.95Mpps@64 bytes |
| MAC Address Table | 8K entries |
| Shared Data Buffer | 512Kbit |
| Flow Control | IEEE 802.3x pause frame for full-duplex |
| Back pressure for half-duplex | |
| Reset Button | < 5 sec: Syssticker reboot |
| > 5 sec: Factory default | |
| LED | 3 LEDs for Syssticker and Power: |
| Green: Power | |
| Green: Fault | |
| Green: Syssticker | |
| 4 LEDs for PoE Copper Ports (Port 1~Port 4): | |
| Green: LNK/ACT | |
| Orange: PoE-in-use | |
| 1 LED for 10/100/1000T Copper Port (Port 5): | |
| Green: LNK/ACT | |
| 3 LEDs for PoE Power Usage (W) | |
| Green: 50, 100 and 120W | |
| Connector | Removable 6-pin terminal block |
| Pin 1/2 for PV panel; Pin 3/4 for alarm; Pin 5/6 for threettery | |
| Alarm | 1 Digital Output (DO): |
| Level 0: -24V~2.1V (±0.1V) | |
| Level 1: 2.1V~24V (±0.1V) | |
| Open collector to 24V DC, 100mA max. | |
| Power Requirements | PV in: 24~45V DC |
| Battery in/out: 24V DC | |
| Power Consumption/ Dissipation | 5.04 watts, 17.1BTU (Standby without PoE function) |
| 6.96 watts, 23.7 BTU (Full loading without PoE function) | |
| 135.36 watts, 461.5 BTU (Full loading with PoE function) | |
| Dimensions (W x D x H) | 84 x 107 x 152 mm |
| Weight | 1026g |
| ESD Protection | 6KV DC |
| Enclosure | IP30 aluminum case |
| Installation | DIN-rail kit and wall-mount ear |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3af/802.3at Power over Ethernet PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | Per port 51V DC, 275mA. Max. 15.4 watts (IEEE 802.3af) |
| Per port 51V DC, 535mA. Max. 30 watts (IEEE 802.3at) | |
| Power Pin Assignment | 1/2 (+), 3/6 (-) |
| PoE Power Budget | 120 watts (PoE consumption + DC out and depending on power input) |
| Max. Number of Class 2 PDs | 4 |
| Max. Number of Class 3 PDs | 4 |
| Max. Number of Class 4 PDs | 4 |
| Electrical Characteristics | |
| Syssticker Voltage Rating | 24V DC |
| Maximum Charging Current | 15A |
| Max. Solar Array VOC | 60V DC |
| Max. Operating Voltage | 45V DC |
| Total Current Consumption | While operating -32Ma |
| At idle -11mA | |
| High Temperature Shutdown | 100 degrees C disconnect solar and load |
| 80 degrees C reconnect solar and load | |
| Overload Capacity | Over 15 Amp will cut off output load |
| Battery Charging Characteristics | |
| Charge Algorithm | Bulk charge (constant current), Absorption charge (constant voltage) and Floating charge. Absorption and Floating charge with PWM protection. |
| Maximum Output Current | 15A |
| Nickel-cadmium Battery | ± 40 mV/degrees Celsius for NiCad type threetteries; charge cut-off @ 55 degrees C |
| (Temperature compensation threeseline@ 25 degrees C) | |
| Lead Acid Battery (Default Setting) | ± 60 mV/degrees Celsius for lead acid type threetteries; charge cut-off @ 55 degrees C |
| (Temperature compensation threeseline@ 25 degrees C) | |
| Float Charge Voltage | DC 27.2V (26.0~30.0V) |
| Absorption Charge Voltage | DC 29.2V (28.0~32.0V) |
| LVD (Low Voltage Disconnection) | DC 22.2V (21.0~25.0V) |
| LVR (Low Voltage Reconnection) | DC 24.8V (23.0~27.0V) |
| Router Features | |
| Internet Connection Type | Shares data and Internet access with users, supporting the following internet accesses: |
| PPPoE | |
| Dynamic IP | |
| Static IP | |
| PPTP | |
| L2TP | |
| Firewall | NAT firewall with SPI (Stateful Packet Inspection) |
| Built-in NAT server supporting Port Forwarding, and DMZ | |
| Built-in firewall with IP address/MAC address/Port/ URL filtering | |
| Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS protection | |
| Routing Protocol | Static/Dynamic (RIP1 and 2) routing |
| VPN Pass-through | PPTP, L2TP, IPSec, IPv6 |
| LAN | Built-in DHCP server supporting static IP address distribution |
| Supports UPnP, Dynamic DNS | |
| Supports IGMP Proxy | |
| Supports 802.1d STP (Spanning Tree) | |
| IP/MAC-threesed threendwidth control | |
| Management | |
| Management Interface | Setup of syssticker/management functions |
| Web firmware upgrade | |
| SNMP trap for alarm notification of events | |
| PoE Management | Power limit by consumption and allocation |
| PoE admin mode | |
| Per port power schedule | |
| Per port power enable/disable | |
| Power feeding priority | |
| Current per port usage and status | |
| Total power consumption | |
| PD alive check | |
| Scheduled power recycling | |
| Battery Management | Battery current usage and status |
| Battery capacity statistics | |
| Low Voltage Cut-Off Protection | |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Standards Compliance | IEEE 802.3 10BASE-T Ethernet |
| IEEE 802.3u 100BASE-TX Fast Ethernet | |
| IEEE 802.3ab 1000BASE-T Gigabit Ethernet | |
| IEEE 802.3x Flow Control and Back Pressure | |
| IEEE 802.1D Spanning Tree Protocol | |
| IEEE 802.3af Power over Ethernet | |
| IEEE 802.3at Power over Ethernet Plus | |
| RFC 768: UDP | |
| RFC 791: IP | |
| RFC 2068 HTTP | |
| RFC 1157: SNMP v1 | |
| RFC 1902: SNMP v2c | |
| RFC 5424: Syslog | |
| Environment | |
| Operating | Temperature: -10 ~ 60 degrees C |
| Relative Humidity: 5 ~ 95% (non-condensing) | |
| Storage | Temperature: -10 ~ 70 degrees C |
| Relative Humidity: 5 ~ 95% (non-condensing) | |
Thông tin đặt hàng
| BSP-360 | Industrial Renewable Energy 4-Port 10/100/1000T 802.3at PoE+ Managed Ethernet Switch |


Reviews
There are no reviews yet.